| RoHSII : | The material is in compliance with EU directive 2011/65/EU (RoHS II) | Components : | Glass fabric bonded with epoxy resin |
|---|---|---|---|
| Color : | Light yellow |
Nema L1-1 : | G-11 |
| DIN 7735 : | HGW 2372.4 (*) |
IEC/DIN EN 60893-3-5 : | EP GC 202/204/306/308/311 |
| BS 3953 : | EP-7 |
NF C 26-151 : | VT-EM 2 |
| Mechanical Properties | TestMethod | Value | Unit | Note |
|---|---|---|---|---|
| Flexural stress at rupture perpendicular to laminations | ISO 178 | 530 |
MPa | |
| Apparent modulus of elasticity in flexure | ISO 178 | 29600 |
MPa | |
| Impact strength (Charpy) parallel to laminations | ISO 179/3C | 130 |
kJ/m2 | |
| Compressive strenght perpendicular to laminations | ISO 604 | 560 |
MPa | |
| Tensile strength at 23°C | ISO 527-4 | 340 |
MPa | |
| Physical Properties | ||||
| Density | ISO 1183 | 2,07 |
g/cm3 | |
| Water absorption after (24h 23°C) | ISO 62 | 9,6 |
mg | |
| Flammability | IEC 60695-11-10 | V-0 |
UL 94 | |
| Electrical Properties | ||||
| Insulation resistance, after the immersion in water | IEC 60167 | 1427000 |
MOhm | |
| Breakdown voltage //, 90°C in oil | IEC 60243-1 | 70 |
kV | |
| Comparative tracking index - CTI | IEC 60112 | 600 V |
||
| Electric strength 90°C in oil perpendicular to laminations | IEC 60243-1 | 12,7 |
kV/mm | |
| Thermal Properties | ||||
| Temperatur index (TI) | IEC 60216 | 180 |
°C | |
| Form of delivery | |
|---|---|
| Tolerance of formats | +/-30mm |
| Thickness in range | 0,2 to 150mm |
| Thickness tolerances | Acc to DIN EN 60893-3-2 |
| The data mentioned in this data sheet is after our knowledge correct, but we reserve the right to make changes without notice. |
| rev: 08/2024 |
| BAGGES AS, Industriveien 15, 2020 Skedsmokorset - Tlf: +47 64 83 50 00 - www.bagges.no - post@bagges.no |
|---|