| RoHSII : | The material is in compliance with EU directive 2011/65/EU (RoHS II) | Components : | Mica/Silicone |
|---|---|---|---|
| Color : | Grey |
| Mechanical Properties | TestMethod | Value | Unit | Thickness | Note |
|---|---|---|---|---|---|
| Flexural strength at RT | ISO 178 | 230 |
MPa | ≥ 1,6mm | |
| Flexural strength at elevated temp | ISO 178 | MPa | ≥ 1,6mm | ||
| Moduls of elasticity | ISO 178 | MPa | ≥ 1,6mm | ||
| Compressive strength at 20°C/200°C | ISO 604 | 400/250 |
MPa | ≥ 5,0mm | |
| Izod impact strength, paralle | ISO 179/3C | kJ/m2 | ≥ 5,0mm | ||
| Shearing strength, parallel | MPa | ≥ 5,0mm | Test methods EN 60893-2 | ||
| Tensile Strength | ISO 527 | 150 |
MPa | ≥ 1,6mm | |
| Physical Properties | |||||
| Density | IEC 60167 | 2,15 |
g/cm3 | All | |
| Water absorption | % | <1 | |||
| Flammability | V-0 |
3,0mm | Test method UL 94 | ||
| Electrical Properties | |||||
| Dielectric strength at 20°C | IEC 60243 | 25 |
kV/mm | ||
| 400°C/1 hour tested at 20°C | IEC 60243 | 13
|
kV/mm | ||
| Relative permittivity at 23/400°C | IEC 60250 | 6,5/7 |
≤ 3,0mm | ||
| Dielectric loss at 160°C | IEC 60250 | <1 |
% | ≤ 3,0mm | |
| Dissipation factor 1 Hz | IEC 60250 | ≤ 3,0mm | |||
| Insulation resistance after immersion in water | IEC 60167 | M Ω | All | ||
| Comparative tracking index | IEC 60112 | 500 |
CTI | > 3,0mm | |
| Thermal Properties | |||||
| Temperature continuous/short time | 500/700 |
°C | |||
| The data mentioned in this data sheet is after our knowledge correct, but we reserve the right to make changes without notice. |
| rev: 09/2021 |
| BAGGES AS, Industriveien 15, 2020 Skedsmokorset - Tlf: +47 64 83 50 00 - www.bagges.no - post@bagges.no |
|---|