PRODUCT DATA SHEET

BAGGES TGE-2

RoHSII : The material is in compliance with EU directive 2011/65/EU (RoHS II) Components :

Glass fabric - epoxy

Color :

Green

Nema L1-1 :

G-11

DIN 7735 :

HGW 2375.4

IEC 61212 :

EP GC 22

Mechanical Properties TestMethod Value Unit Thickness Note
Flexural strength ISO 178

350

MPa id > 100mm *1
Compressive strength axial ISO 604

250

MPa *1
Cohesion between layers IEC 61212-2 4.3

480

MPa id < 100mm *1
Physical Properties
Density IEC 1183-A

1,80

g/cm3 All *1
Water absorption after (24h 23°C) IEC 62/1

0,2

mg/cm2 50x50x3 mm *4
Electrical Properties
Electric strength in oil at 90°C IEC 60243-1

11,0

kV/mm perpendicula B) 3,0 mm *2
Electric strength in oil at 90°C IEC 60243-1

60

kV/25mm parallel B) 3,0 mm *2
Permittivity 50 Hz IEC 60250

4,5

*3
Permittivity 1 MHz IEC 60250

4,5

*3
Dissipation factor 50 Hz IEC 60250

0,010

*3
Dissipation factor 1 MHz IEC 60250

0,010

-
Insulation resistance after immersion in water IEC 60167

1000

M Ω A) *4
Thermal Properties
Thermal endurance index 20.000h (T.I.) IEC 60216

180

°C ≥ 3,0 mm -
Characteristics and applications / Notes and Conditioning

Particularly good electrical andmechanical properties. Extremely highmechanicalstrength even at high temperatures. Retains electrical properties at high air humidity.High resistance to chemicals. Construction and insulationmaterial in large rotating electricalmachines and insulation cylindersin dry transformers.

Notes *Conditioning
A) ID > 8mm and/or OD > 10mm 1: 24h/23°C/50%RH 
B) Wall thickness 2: 24h/23°C/50%RH + 1h/Oil 90°C
C) 230 MPa measured at 150°C 3: 96h/105°C + 1h/23°C/20%RH
D) Wall thickness ≥ 4,0mm 4: 24h/50°C + 24h/water 23°C
  5: 96h/105°C + 1h/Oil 90°C

 

Print siden Last ned