PRODUCT DATA SHEET

BAGGES TGS

RoHSII : The material is in compliance with EU directive 2011/65/EU (RoHS II) Components :

Glass fabric - silicone
Color :

White

 Serial no :

820
Nema L1-1 :

G-7

 DIN 7735 :

Hgw 2375
IEC 61212 :

SI GC 21
Mechanical Properties TestMethod Value Unit Thickness Note
Flexural strength ISO 178

120

 MPa id > 100mm *1
Compressive strength axial ISO 604

65,0

 MPa *1
Cohesion between layers IEC 61212-2 4.3

150

 MPa id < 100mm *1
Physical Properties
Density IEC 1183-A

1,80

 g/cm3 All *1
Water absorption IEC 62/1

0,2

 mg/cm2 50x50x3 mm *4
Electrical Properties
Electric strength in oil at 90°C IEC 60243-1

6,7

 kV/mm B) 3,0 mm *2
Electric strength in oil at 90°C IEC 60243-1

40

 kV/25mm B) 3,0 mm *2
Permittivity 50 Hz IEC 60250

4,0

 *3
Permittivity 1 MHz IEC 60250

4,0

 *3
Dissipation factor 50 Hz IEC 60250

0,006

 *3
Dissipation factor 1 MHz IEC 60250

0,006

 *3
Insulation resistance after immersion in water IEC 60167

5000

 M Ω A) *4
Thermal Properties
Thermal endurance index 20.000h (T.I.) IEC 60216

210

 T.I. ≥ 3,0 mm -
Characteristics and applications / Notes and Conditioning

Particularly good electrical and mechanical properties. Extremely high mechanical strength. Retains electrical properties at high air
humidity. High resistance to chemicals. Construction and insulation material in large rotating electrical machines and insulation cylinders
in dry transformers.
Notes *Conditioning
A) ID > 8mm and/or OD > 10mm 1: 24h/23°C/50%RH 
B) Wall thickness 2: 24h/23°C/50%RH + 1h/Oil 90°C
C) 230 MPa measured at 150°C 3: 96h/105°C + 1h/23°C/20%RH
D) Wall thickness ≥ 4,0mm 4: 24h/50°C + 24h/water 23°C
  5: 96h/105°C + 1h/Oil 90°C

 
The data mentioned in this data sheet is after our knowledge correct, but we reserve the right to make changes without notice.
rev: 09/2021
BAGGES AS, Industriveien 15, 2020 Skedsmokorset - Tlf: +47 64 83 50 00 - www.bagges.no - post@bagges.no
Print siden Last ned